Solar & Battery Installation Melbourne - North East Local Installers & Quotes
ℹ️ Get quick estimates for solar and battery sizing, costs, and savings in Melbourne - North East using these simplified calculators. For more accurate, advanced calculations, use the full Photonik design platform.
Solar Design Melbourne - North East
Energy Usage
To choose the right solar system in Melbourne - North East, start by understanding your daily electricity consumption. Typical homes consume approximately 25 kWh daily on average, though well-insulated properties with efficient appliances often use significantly less.
Reducing your energy consumption before installing solar can lower your system size requirements and improve returns. Consider upgrading insulation and switching to energy efficient appliances first.
Typical energy usage per person per day in Melbourne - North East:
Note: Actual usage varies depending on property size, building efficiency, climate, and appliances.
Solar System Sizing
To offset your average consumption, you'd need roughly 6.6kW of solar capacity. For best results, size your system between 9.9kW and 13.2kW to account for fluctuations in solar output throughout the day and year.
In Melbourne - North East, a 6.6 kW installation produces around 27.8 kWh per day on average, though output ranges from 3.23 kWh/kW/day during June to 4.80 kWh/kW/day in February.
Solar & Energy Savings
Calculate Heat Pump & EV Savings
Electrify your home by replacing gas heating, petrol vehicles, and other fossil fuel appliances with electric alternatives powered by clean solar energy. This delivers significant additional financial savings and substantial carbon emission reductions. Our calculator helps you compare costs and model the financial impact of switching to electric appliances and vehicles.
How Solar Reduces Your Electricity Bills
The calculations below show how your electricity bills change with solar. Your Old Bill of - per month (- annually) is calculated from your total energy consumption multiplied by the grid electricity rate. Your New Bill of - per month (- annually) accounts for solar generation, the percentage you use directly (self-consumption), remaining grid consumption, and feed-in credits for excess energy exported to the grid. This results in monthly savings of - (- annually).
Battery Storage Melbourne - North East
Solar Battery Sizing
Solar-only systems in Melbourne - North East typically provide 50% self-usage with a 6.6 kW installation, meaning 50% of your electricity still comes from the grid. Including a 10 kWh battery typically raises annual self-sufficiency to around 86%, with grid reliance dropping to 14%.
Accurate battery savings and ROI require the full Photonik design platform for comprehensive calculations.
Energy Self Sufficiency Calculator*
*Note: This calculator provides simplified battery self-sufficiency estimates. For accurate per-hour simulations that account for solar generation patterns, consumption timing, battery charging/discharging cycles, and efficiency losses across all seasons, use the full Photonik design tool.
Panel Placement Tool Melbourne - North East
This is a simple panel placement tool that lets you quickly estimate panel count for a single roof area. Try Photonik for advanced features:
- Multiple panel groups
- Custom roof angles
- Panel orientation
- Shade loss calculations
- Panel selection (1000+ models)
- Full integration with our design tool
Loading panel placement tool...
Solar & Battery System Cost Melbourne - North East
Understanding Solar & Battery System Costs
Solar installation costs in Melbourne - North East start at approximately $7,661 for a 6.6 kW system, with a 10 kWh battery bringing the total to around $12,904. Most solar-only systems reach payback in approximately 5.2 years, though battery storage lengthens payback periods whilst substantially boosting energy independence.
The pricing breakdown includes equipment, installation labour, and applicable taxes. Use the sliders to adjust system size and battery capacity to see how pricing and payback change.
STC Rebates Melbourne - North East
STC rebates in Melbourne - North East are calculated based on your system size, location zone factor, and deeming period until 2031.
Use our full design tool for detailed system design, panel placement, and professional proposals.