Solar & Battery Savings in MITCHAM 3132 System Prices & Generation Data
ℹ️ Get quick estimates for solar and battery sizing, costs, and savings in MITCHAM 3132 using these simplified calculators. For more accurate, advanced calculations, use the full Photonik design platform.
Solar Design MITCHAM 3132
Energy Usage
Your daily energy consumption determines the optimal solar system size for your home in MITCHAM 3132. The average household uses between 20-30 kWh per day, whilst energy efficient properties may use only half that.
Before installing solar it is often a good investment to first look to reduce your energy consumption where possible. This can be done through improved insulation, and energy efficient appliances.
Typical energy usage per person per day in MITCHAM 3132:
Note: Actual usage varies depending on property size, building efficiency, climate, and appliances.
Solar System Sizing
You'll need around 4.4kW of solar to match your average consumption. We recommend sizing 50-100% above your usage for optimal results as solar output fluctuates daily and seasonally.
An 8 kW system in MITCHAM 3132 generates approximately 34 kWh daily on average. Output varies seasonally (49% difference), with peak generation of 38 kWh in February and 26 kWh in June. This variation is typical for your latitude and should be accounted for when sizing your system.
Solar generation data for MITCHAM 3132:
Solar & Energy Savings
Calculate Heat Pump & EV Savings
Electrify your home by replacing gas heating, petrol vehicles, and other fossil fuel appliances with electric alternatives powered by clean solar energy. This delivers significant additional financial savings and substantial carbon emission reductions. Our calculator helps you compare costs and model the financial impact of switching to electric appliances and vehicles.
How Solar Reduces Your Electricity Bills
The calculations below show how your electricity bills change with solar. Your Old Bill of - per month (- annually) is calculated from your total energy consumption multiplied by the grid electricity rate. Your New Bill of - per month (- annually) accounts for solar generation, the percentage you use directly (self-consumption), remaining grid consumption, and feed-in credits for excess energy exported to the grid. This results in monthly savings of - (- annually).
Battery Storage MITCHAM 3132
Solar Battery Sizing
With solar-only (no battery), an 8 kW system provides approximately 50% self-usage in MITCHAM 3132, depending on your consumption patterns, drawing 50% from the grid. Adding a 5 kWh battery increases energy independence to approximately 68% annually, reducing grid reliance to 32%.
Note: For accurate battery savings and ROI calculations, use the full Photonik design tool.
Energy Self Sufficiency Calculator*
*Note: This calculator provides simplified battery self-sufficiency estimates. For accurate per-hour simulations that account for solar generation patterns, consumption timing, battery charging/discharging cycles, and efficiency losses across all seasons, use the full Photonik design tool.
Panel Placement Tool MITCHAM 3132
This is a simple panel placement tool that lets you quickly estimate panel count for a single roof area. Try Photonik for advanced features:
- Multiple panel groups
- Custom roof angles
- Panel orientation
- Shade loss calculations
- Panel selection (1000+ models)
- Full integration with our design tool
Loading panel placement tool...
Solar & Battery System Cost MITCHAM 3132
Understanding Solar & Battery System Costs
A 8 kW solar system in MITCHAM 3132 costs approximately $9350, while adding a 5 kWh battery increases the total to around $12408. Solar-only systems typically pay for themselves in around 4.1 years, whilst adding battery storage usually extends payback whilst increasing energy independence.
The cost breakdown shows estimates for equipment costs, installation labour, and GST. Adjust system size and battery storage to see how it affects total investment and payback periods.
STC Rebates MITCHAM 3132
STC rebates in MITCHAM 3132 are calculated based on your system size, location zone factor, and deeming period until 2031.
Use our full design tool for detailed system design, panel placement, and professional proposals.